Videos / Other Resources

No attachments were found.

Table Control - Cycling / Table Aside (TN2)

Cycling Hot Keys
Set Table Aside
Set Table Aside Edit Button



tabeaside1.png




Cycling Hot Keys

  • Cycle To First In Line - This will go to the first table that has action if the current table has no action.  (If the current table has action, this does nothing.)
  • Cycle Forward - If your tables are stacked or cascaded, this hotkey will move the bottom most table to the top. Otherwise, it will cycle through your tables from left to right and top to bottom.
  • Cycle Backward - If your tables are stacked or cascaded, this hotkey will move the top most table to the bottom and activate the second table in the stack. Otherwise, it will cycle through your tables from right to left and bottom to top.
  • Cycle Forward / Backward cycles tables in Z-order - This will cycle tables to different positions.  (Table 1 will go to table 2 position, table 2 will go to table 3 position and so on.)
  • Cycle To Next In Line - This allows you to move through the tables that have action.
  • Cycle to Prev In Line - This allows you to move through the tables that have action.
  • Cycle to Table with Popup -This will cycle your tables to the table that currently has an active popup.
  • "G" Checkbox - Will make this hotkey global, otherwise it will only work when Hot Keys are turned on.

 

 

Set Table Aside

Set Table Aside lets you set tables aside that you want to remain out of the standard layout.  You might have a few MTT's going and one Final Table.  You can now use Set Table Aside to move the selected table out of your stack.

To set this up, assign a Hotkey to STA 1-10 and click the Edit button.  Once you are on this screen, Click the Add TA Slot button to tell TableNinja where you want this set table aside table to be.

 

  • No Snap Back - If checked, once you move a table into this slot, you can never move it back.
  • New Tables - If checked, New tables are placed here until you manually move them back to the original layout.
  • Unseated Stack - If checked, Tables where you are not seated are placed here.
  • With Popups - If checked, Tables that contrain a popup are palced here until you've deaalt with the popup.

 

  • Global STA - The Global STA will toggle ALL "Normal" STAs. When pressed on a table it will move it to the first available STA slot. When pressed on an STA slot, it will move the table back to its original location.

 

  • Allow several table in the same STA Slot - This will allow you to stack multiple tables in the same location when STA is active.
  • Allow a single table in the STA Slot (Same as TN1) - This will only let a single table occupy a STA slot.

 

Set Table Aside Edit Button

Show "Table Aside (TA) slots
Add TA Slot


layouteditor.jpg



Show "Table Aside (TA) slots 

When you have a hotkey assigned to Set Tables Aside, use this to turn this feature on and off.

 

 

 

Add TA Slot

Click the Add TA Slot to tell TableNinja II where to place the Set Table Aside.

 

 




| More

Related Articles


User Opinions (1 vote)

0% thumbs up 100% thumbs down

How would you rate this answer?



Thank you for rating this answer.

Continue